Dogs can get sick just like people, but taking their temperature using an infrared thermometer isn’t as simple as it sounds. It’s best to take your dog’s temperature when you first notice symptoms of illness so that you can seek veterinary care as soon as possible.
But this step-by-step guide will teach you How To Take A Dogs Temperature With An Infrared Thermometer and provide some tips on what to do if your pooch is running a fever or has a low body temperature.
Choosing the right thermometer
The first step in taking your pet’s temperature is deciding which type of thermometer you will use. There are many types of thermometers on the market, but the most common ones used for dogs are either a digital or an infrared thermometer. There are pros and cons to both types of thermometers, but I think infrared is better because it doesn’t require contact with the animal.
This makes it much easier if your pup is squirming around and won’t hold still long enough for you to get a reading. You can also take their temperature from anywhere in the room without having to hold them down, making it less stressful for everyone involved.
Another great thing about infrared thermometers is that they don’t have any batteries to replace like some other kinds do.
And as if those reasons weren’t enough…they’re much cheaper than a digital one! So save yourself the headache of going through three different thermometers before finding one that works and just go with infrared instead.
They come in all sorts of shapes and sizes, so no matter what kind you need- short range or long range- there’s an option for you. My personal favorite is the Forehead Thermometer because it has an ergonomic design for comfort and accuracy.
All you have to do is press gently on your pet’s forehead, wait ten seconds for the beep, and then read the results off of the screen. It takes just seconds to see whether or not they have a fever!
Taking your dog’s temperature
Dogs are susceptible to many of the same illnesses that we are and it is important to monitor their health. To help you monitor your dogs health, we will teach you how to take your dogs temperature with an infrared thermometer.
An infrared thermometer is a great tool for checking temperatures in hard-to-reach places. Simply point the device at the body part where you want the reading and press the trigger button. Wait five seconds before moving on to the next spot, so that you can get an accurate reading.
For example, if your dog has been running around outside or playing with other dogs, they may have a higher temperature than normal due to all of the exercise they’ve been doing. Check under their armpits or on top of their head because these spots tend to be cooler when they’re hot.
Interpreting your dog’s temperature
Dogs have two types of body temperatures: the average body temperature (which is 101.5 degrees Fahrenheit) and the core body temperature (usually around 102.2 degrees Fahrenheit).
The average body temperature can vary, which is why it is important to check your dog’s core body temp. The best way to do this is with an infrared thermometer, which measures the amount of heat energy in the air surrounding your pet and converts that into a digital reading on its display screen.
Here are the steps for taking a dog’s temperature with an infrared thermometer:
The first step is to place the probe under your dog’s armpit. When you do this, make sure that you hold the probe steady and still so it doesn’t move or give you inaccurate readings.
Make sure not to press too hard as dogs are sensitive about their armpits just like humans are about their chests. Take care to keep the probe clean because dirt could affect the accuracy of your readings. Once you’ve taken your dog’s temperature, note down what it says and what time it was taken at.
Keep in mind that any changes should be checked out by a vet. If your dog has a fever of over 103 degrees Fahrenheit, you’ll want to contact your vet immediately because this could be indicative of canine distemper.
The second step is to bring the probe up the chest towards your dog’s head until it reaches his throat.
Take care when doing this and remember not to push too hard! You don’t want to cause any damage when taking measurements!
It is important to know how to take your dog’s temperature, as it can indicate if they are running a fever. This simple process takes only minutes and only requires you and an infrared thermometer.
Be sure not to leave your pup unattended for too long during this process, just in case they get spooked and run away from you! The average body temperature of dogs ranges from 101.3-102.8 degrees Fahrenheit, so there may be some variation depending on the breed of your pup or the time of year.
If you are concerned about your pet and want more information about what to do next after taking their temperature, consult with a veterinarian.